CAT.SA303B/SA305B
TOP |
| SIDE | BACK |
VIEW |
| VIEW | VIEW |
4.34”
1.9”
ARCHITECTURAL AND ENGINEERING SPEC
The smoke alarm shall be a First Alert Model SA303 (cat no. SA303B and SA305B) and shall provide at a minimum the following features and functions:
1.A dual ionization sensing chamber.
2.The unit shall be capable of self restoring.
3.A fully screened sensing chamber to resist entry of small insects thereby reducing the probability of unwanted alarms.
4.Powered by a supervised 9V battery and a solid state piezo horn
rated at 85dB at 10 ft. Cat no. SA303B features a carbon zinc battery and cat no. SA305B features a lithium battery.
5.A visual LED
6.A full function test button. The test button should check all alarm functions by stimulating the chamber to simulate a smoke condition, causing the unit to alarm and also has a silence feature to silence unwanted nuisance alarms.
7.Two Locking features - tamper resistant locking pins that lock battery drawer and/or alarm to mounting bracket.
9.The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 90%.
10.The unit shall contain mounting hardware and shall be listed for wall or ceiling mounting.
11.The unit shall at a minimum meet the requirements of UL217, CSFM, NFPA 72, NFPA 101, ICC.
12.The unit shall be suitable for use in Recreational Vehicles.
INSTALLATION OF ALARM
Installation of this smoke alarm must conform to NFPA 72. Always check your local building codes. Follow all instructions for placement as outlined in the user’s manual.
THE PARTS OF THIS SMOKE ALARM
TOP OF ALARM
1. Battery Compartment
2. Test/Silence Button &
Red Alarm Light
1 | 3 |
| BOTTOM OF ALARM |
|
|
| |
|
| 1. | Mounting bracket |
| 2 | 2. | Mounting slots (1 of 2) |
2 |
| 3. | Locking Pins |
3 |
| 4. | Battery Drawer Latch |
4 |
| 5. | Battery Drawer - Install |
|
|
| 9V battery here |
5
TECHNICAL SPECS
Alarm Dimensions: | 4.34” dia x 1.9”H |
|
|
Weight: | 6.8 oz. |
Operating Voltage: | 9V Battery Powered (SA303B carbon zinc; SA305B lithium) |
Temperature Range: | 40F (4C) to 100F (38C) |
|
|
Humidity Range: | 10% to 90% relative humidity (RH) |
|
|
Audio Alarm: | 85dB at 10 feet |
Test/Silence: | Electronically simulates smoke condition, |
| causing the unit to alarm |
Manual: | Press and hold test/silence button |
|
|
Alarm Reset: | Automatic when smoke clears |
|
|
Smoke Sensor: | Dual Ionization |
Indicator Lights/Sounds: |
|
DC Power: | Intermittent Red Light |
Alarm: | Audio alarm, rapidly flashing red light |
|
|
Listing: | UL to UL217 Standard |
SHIPPING SPECS:
Individual Carton Dimensions | 5.65 ”L x 2.03”W x 5.46”H |
Weight | 0.54 lbs. |
Cube | 0.036 ft3 |
UPC | SA303B: 0 29054 00095 8 |
| SA305B: 0 29054 12310 7 |
|
|
Master Carton Dimensions | 13.125”L x 5.810”W x 12.130”H |
Master Pack | 12 |
Weight | 7.0 lbs. |
Cube | 0.535 ft3 |
UPC | SA303B: 100 29054 00095 5 |
| SA305B: 100 29054 12310 4 |
|
|
Pallet Information |
|
Cases per Layer | 25 |
Number of Layers | 3 |
Cases per Pallet | 755 |
Units per Pallet | 900 |
Cube | 47.3 ft3 |
Weight | 590 lbs. |
|
|
BATTERY DRAWER LOCK
Push locking pin through
Remove Pinhole near battery drawer on the back of the alarm.
| ©2009 BRK Brands, Inc. a Jarden Corporation |
| Company (NYSE: JAH) |
| 3901 Liberty Street Road |
| Aurora, IL |
| All rights reserved |
brkelectronics.com | First Alert is a registered trademark of the First Alert Trust |
BRK is a registered trademark of BRK Brands, Inc. | |
| CM2910 |