3. How To Operate
The operation, control and settings of this device can be made by using the control panel located on the main unit. The following shows the operating procedures.
3-1. Control Panel
"Description on screen
(1) |
(3) |
(12) |
(10) |
(13) |
(6) |
(1)ON LINE/OFF LINE Indication
Displays the ON LINE/OFF LINE status of the device.
(2)Message Column
Displays the status of the device. READY . . . . . . . . . . Ready for print PRINTING . . . . . . . In print process WARMINGUP . . . . During
(3)Information of Loaded Film
Displays film type, size, number of remaining films in the upper and lower trays respectively.
Size | Film type | No. of remaining films |
14 x 17 | B | |
14 x 14 | C |
|
11 x 14 | DRB |
|
|
|
|
(4)PRINT QUEUE
Displays the number of films waiting to be printed.
(2) |
(11) |
(8) |
(4) |
(9) |
(7) |
(5) |
(8) FILM SET / TRAY OPEN / CALIBRATION Key |
The FILM SET key opens the tray when the film tray becomes empty. (Refer to page 11 for details.)
The TRAY OPEN key opens the tray when a film jam occurs in the tray. (For removing film jams, refer to page 52.)
The CALIBRATION key is displayed to prompt you to perform density correction when [MESS] is selected in the WEEKLY CALIBRATION settings. (Refer to page 24 for calibration.)
(9)ERROR RESET Key
Resets the device when an error occurs. This key appears only when an error occurs. (Refer to page 49 for error reset.)
(10)COVER OPEN Key
Opens the front cover when film jams occur. This key appears only when film jams occur. (For removing film jams, refer to page 52.)
(11)FILTER EXCHANGE Key
This key appears when the FILTER has to be replaced. The pro- cedure for replacing the FILTER appears. (For replacing the FILTER, refer to page 66.)
(5)OPERATION OFF Key
Turns the power OFF and stops the operation.
(6)ON/OFF LINE Key
Switches connected/disconnected (ON LINE/OFF LINE) to/from the diagnostic device for communica- tions.
(7)MAINTENANCE Key
Switches to the maintenance mode to change the set- tings and perform the inspection. This key appears only when the device is in the OFF LINE status. (Refer to page 16 for details.)
(12)SORTER COVER Key
Displayed when a film jam occurs in the sorter (option). Dis- plays the procedure for removing film jams. (For removing film jams, refer to page 52.)
(13)PREVENTIVE MNT Key
Displayed when the periodical maintenance inspection period comes. (Refer to page 67 for periodical maintenance inspec- tion.)
DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 5
