5-3.Removing Jam

"Jam in tray

The screen on the right shows an example where the film cannot be transported from the tray and it jams. Follow the procedure below to remove the jammed film.

(1)If the film is protruded from the shutter of the tray, pull the film out to remove.

CAUTION

When pulling out the film, do not open the shutter of the tray. otherwise, the film in the tray is solar- ized.

If the film is not protruded, shake the tray backward and fore- word several times.

￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿

(2)Press in the tray until it locks.

The normal screen will re-appear after a while when the mes- sage of "PLEASE WAIT" appears.

When there queued print data remains, printing starts automat- ically.

DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 53

Page 65
Image 65
Konica Minolta 752 operation manual Jam in tray, Press in the tray until it locks