4-3.How To Operate Maintenance Mode
(10)Touch the key on the right of the setting item, then set the following items.
ORIENTATION : Sets the direction of an image.
| PORTRAIT : An image is in the por- |
| trait orientation. |
| LANDSCAPE : An image is in the land- |
| scape orientation. |
POLARITY | : Selects the negative or positive of an |
| image. |
TRIM | : Selects whether or not to trim an image. |
BORDER | : Selects a border color. |
| BLACK |
| CLEAR |
FLIP | : Sets whether or not to enhance characters. |
| ON : Enhances characters. |
| OFF : Does not enhance characters. |
(11)After the settings are complete, touch 
on the upper part of the screen once.
The print preference set screen (5/7) will appear.
(12)Select the item to be printed as the stamp with [STAMP SELECT].
The item displayed in the highlighted key will be printed as the stamp.
(13)If you select [STAMP MESSAGE] in Step (12), touch the frame under [STAMP MESSAGE], then input the message to be printed as the stamp.
The keypad screen for inputting characters will appear.
The screen on the right shows the example of characters to be input.
(14)Select the position at which the stamp is printed with [STAMP DIRECTION].
Selects the position at which the stamp is printed from the four keys. The stamp will be printed at the position of the line dis- played in the highlighted key.
(15)After the settings are complete, touch 
on the upper part of the screen once.
The print preference set screen (6/7) will appear.
40 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
