"Setting power saving mode
The DRYPRO has the power saving mode that saves power consumption automatically after no data is printed for a specified time.
The power saving mode has two kinds of settings: [TOUCH PANEL POWER SAVE] for let the backlight of the control panel fade out, and [HEAT ROLLER POWER SAVE] for lowering the temperature in the HPRO.
Follow the procedure below to set the power saving mode.
(1)Touch [POWER SAVE] on the MAINTENANCE MENU screen.
The power save set (POWER SAVE) screen will appear.
(2)In order to let the backlight of the control panel fade out, touch [ON] on the right of [TOUCH PANEL POWER SAVE].
(3)Touch the key on the right of [TIMER], then touch the numeric keys on the lower part of the screen to set the time (minute) to go into the power saving mode.
(4)In order to save power consumption in the HPRO section, touch [L], [M], or [H] on the right of [HEAT
ROLLER POWER SAVE].
[L], [M], or [H] shows the temperature in the HPRO section in the power saving mode.[L] means that the temperature is the lowest, and [M] means it is medium, and [H] means it is the highest.
CAUTION
If you set the temperature to low, the power con- sumption can be saved much in the power saving mode. However it takes longer for the DRYPRO to exit from the power saving mode and go into the READY status.
The recovering time period is about 10 minutes when [L] is set, 6 minutes when [M] is set, and 3 minutes when [H] is set.
DRYPRO MODEL 752 Operation Manual Ver.0.12 2002.7 45
