4. Maintenance Mode
4-1. Function of Maintenance Mode
This device has the maintenance mode that executes maintenance functions.
Touching [MAINTENANCE] on the control panel on OFF LINE will switch into the maintenance mode and display the maintenance screen on the control panel.
In addition to the maintenance operations, the START TIMER function can be set, and
•The print data from the diagnostic device cannot be received or printing cannot be made in the mainte- nance mode.
The following shows the maintenance items that can be selected/executed in the maintenance mode.
No. | Display |
|
| Description |
|
|
|
|
|
1 | START TIMER | Sets the START TIMER function to ON/OFF, and sets the | ||
|
| each day. |
| |
|
| The START TIMER screen will appear. (Refer to page 18.) | ||
|
|
|
|
|
2 | TIME SET | Sets the time of the clock of the device. The TIME SET screen will appear. | ||
|
| (Refer to page 19.) | ||
|
|
|
|
|
3 | PREVIOUS PRINT | |||
|
| The PREVIOUS PRINT screen will appear. (Refer to page 20.) | ||
|
|
|
|
|
4 | CALIBRATION | Prints the calibration sheet and corrects the density on the film. (Refer to | ||
|
| page 24.) |
| |
|
|
|
|
|
5 | TEST PRINT | Prints out the SMPTE pattern to control the density. | ||
|
| The TEST PRINT screen will appear. (Refer to page 26.) | ||
|
|
|
|
|
6 | COVER OPEN | Open the front cover. (Refer to page 30.) | ||
|
|
|
|
|
7 | PANEL ADJUST | Adjusts the LCD contrast, the brightness of the backlight, and the touch area | ||
|
| in the touch panel. | ||
|
| The PANEL ADJUST screen will appear. (Refer to page 31.) | ||
|
|
|
|
|
8 | QUEUE CLEAR | Clears the data queued in the device that has not been printed yet. | ||
|
| The QUEUE CLEAR screen will appear. (Refer to page 33.) | ||
|
|
|
|
|
9 | COLD START | |||
|
|
| CAUTION | When the device is |
|
|
|
| of the print data queued for printing and the saved |
|
|
|
| |
|
|
|
| data that has been already printed out will be |
|
|
|
| deleted. |
|
|
|
|
|
10 | FILM DATA | Confirms the sum of film. Sets the types of film to be counted, and date on | ||
|
| which film is counted. (Refer to page 36.) | ||
|
|
|
|
|
11 | PRINT CONDITION | Sets the print preferences for each of the connected diagnostic devices. | ||
|
| (Refer to page 38.) | ||
|
|
|
|
|
12 | USER LUT | Creates user's own LUT curve, and applies it to the diagnostic device. (Refer | ||
|
| to page 43.) |
| |
|
|
|
|
|
13 | FILMSET RETRY | Used when the film fails to be loaded. (Refer to page 61.) | ||
|
|
|
|
|
|
|
| CAUTION | Do not use this mode under the normal operation |
|
|
|
| as the number of films in the tray resets to 0. |
|
|
|
| |
|
|
|
|
|
14 | POWER SAVE | Sets the power saving function of the device. (Refer to page 45.) | ||
|
|
|
|
|
CAUTION
The print data from the diagnostic device cannot be received or printing cannot be made in the maintenance mode. The print data queued for printing will be printed out after the device exits from the maintenance mode.
16 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
