Konica Minolta 752 Select NEGA/POSI by touching NEGA or POSI, Touch STORE, Touch OK

4-3.How To Operate Maintenance Mode

7

Does not perform the magnification interpolation. But prints out in the MAGNIFICATION setting. When you wish to change this setting, ask a service person.

(9)Select NEGA/POSI by touching [NEGA] or [POSI].

(10)Touch on the upper part of the screen.

The print preference set screen (3/3) will appear.

(11)Touch the key on the right of the setting item, then touch the numeric keys to set the following items.

MAX DENSITY : Sets the maximum density of an image.

MIN DENSITY	: Sets the minimum density of an image.
Lo	: (Not used for the current version.)
La	: (Not used for the current version.)
SORTER	: Sets the bin in the sorter (option) into
	which the film is discharged.

(12)Touch [STORE].

The confirm screen will appear.

If the tray is not selected, the screen for selecting the tray in Step (2) will appear.

(13)Touch [OK].

The print data in the SMPTE pattern will be queued, and the maintenance menu screen will re-appear.

Touching [CONDITION SET UP] allows you to redo the print preference settings. (Steps (4) through (12))

(14)Touch [EXIT] to end the maintenance mode.

When the normal screen re-appears, the film in the selected tray is transported and the SMPTE pattern is printed out. Wait until printing is complete.

28 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6