Pioneer Comprehensive Guide to Operating Bluetooth with CD-BTB200

Section

05Operating with different head units

!While you are listening to songs on your Blue- tooth audio player, please refrain from operat- ing on your cellular phone as much as possible. If you try operating on your cellular phone, the signal from your cellular phone may cause a noise on the song playback.

!When you are talking on the cellular phone connected to this unit via Bluetooth wireless technology, the song playback from your Blue- tooth audio player connected to this unit is muted.

!Even if while you are listening to song on your Bluetooth audio player you switch to another source, the playback of song continues to elapse.

!Operation varies depending on the type of your cellular phone and Bluetooth audio player. Refer to the instruction manual that came with them for detailed instructions.

Notes

!This unit’s phone call reception is on standby when ignition switch is set to ACC or ON.

!The line-of-sight distance between this unit and your cellular phone must be 10 meters or less for sending and receiving voice and data via Bluetooth wireless technology. However, the transmission distance may become short- er than the estimated distance, depending on the environment in use.

!TEL and BT AUDIO are set to the same vo- lume and the same SLA (Source Level Adjust- ment) volume. Change the volume value for TEL or BT AUDIO each time, if needed.

!If the remote control have PGM button, you can perform following operations with it:

—When selecting TEL as a source, you can scroll a phone number in the call history.

—When selecting BT AUDIO as a source, you can pause a song.

Function compatibility charts

Head unit group 1

Controls of Bluetooth telephone

Select TEL/BT AUDIO	Press SOURCE.
as a source
Switch between TEL	When selecting TEL/BT
	AUDIO as a source, press
and BT AUDIO
	BAND.
Put the unit in VOICE	When selecting TEL as a
	source, press and hold
ON mode*
	BAND.
Take a phone call	When a call comes in, press
	a.
End a call	Press b.
Display the received/	Press c.
missed call history
Display the dialled	Press d.
call history
	When displaying the dialled

Select a phone num- or received/missed call his-

ber from the dialled	tory, press c or d.
or received/missed	If you want to return to the
call history	telephone standby display,
	press b.
	When selecting a phone
Make a call	number from the dialled and
	received call history, press a.
	When selecting TEL as a
Select a function	source, press FUNCTION
	(FUNC).
Scroll a phone num-	When selecting TEL as a
	source, press a or b in
ber in the call history
	FUNC1 (F1).
Put the unit in	When selecting TEL as a
	source, press and hold a or
C.OPEN mode
	b in FUNC1 (F1).
Put the unit in RE-	When selecting TEL as a
	source, press a or b in
GIST mode
	FUNC2 (F2).

*You can use this function if your cellular phone features voice recognition technology.

26 En