Pioneer CD-BTB200 owner manual Installation, Installing this unit, Installing the microphone

Section

07 Installation

Important

!Check all connections and systems before final installation.

!Do not use unauthorized parts. The use of un- authorized parts may cause malfunctions.

!Consult with your dealer if installation re- quires drilling of holes or other modifications of the vehicle.

!Install the unit where it does not get in the dri- ver’s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

!When installing this unit, be sure to make suf- ficient space on its top surface. There is an an- tenna under the top surface and covering it may cause trouble to the radio transmission and reception.

!Depending on the location of this unit, some noise could be heard during playback of the songs on Bluetooth audio player. In this situa- tion, move this unit so as to reduce noise.

!When mounting this unit, make sure none of the leads are trapped between this unit and the surrounding metalwork or fittings.

!Do not mount this unit near the heater outlet, where it would be affected by heat, or near the doors, where rainwater might splash onto it.

!Before drilling any mounting holes always check behind where you want to drill the holes. Do not drill into the gas line, brake line, electrical wiring or other important parts.

!If this unit installed in the passenger compart- ment, anchor it securely so it does not break free while the vehicle is moving, and cause in- jury or an accident.

!If this unit is installed under a front seat, make sure it does not obstruct seat move- ment. Route all leads and cords carefully around the sliding mechanism so they do not caught or pinched in the mechanism and cause a short-circuit.

Installing this unit

Mounting with Velcro fasteners

Thoroughly wipe off the surface before affixing the Velcro fasteners.

!If the Velcro fasteners (hard) adhere to the car mat directly, you may install this unit without using the Velcro fasteners (soft).

%Mount this unit using the Velcro fasten-

ers.

This unit

Velcro fastener (hard)

Velcro fastener (soft)

Car mat or chassis

Installing the microphone

CAUTION

It is extremely dangerous to allow the micro- phone lead to become wound around the steer- ing column or gearstick. Be sure to install the unit in such a way that it will not obstruct driving.

Note

Install the microphone in a position and orienta- tion that will enable it to pick up the voice of the person operating the system.

36 En