Section
02 Bluetooth Telephone
Connecting a cellular phone
To use a phone wirelessly with this unit, it is necessary first to establish a connection using Bluetooth wireless technology. There are sev- eral ways you can do this.
!Connection is normally established by HFP, which gives you a full control of functions available on the telephone source. How- ever, in some cases when you make con- nection from your cellular phone, the connection may be made by HSP and sev- eral functions may not be available.
!A phone may be connected via Bluetooth wireless technology but not yet registered with this unit. In this case it is said to be temporarily connected, and the available features are limited. To take full advantage of all the features available, we recommend you register your phone with this unit. Refer to Registering connected cellular phone on the next page for more on this.
Searching for available cellular phones
You can have this unit search for any available phones in the area that have Bluetooth wire- less technology, then select which you want to connect to from a list displayed
1Touch PHONE CONNECT on the function menu.
2Touch Search to search for available cel- lular phones.
While searching, SEARCHING is displayed. When available cellular phones featuring Bluetooth wireless technology are found, de- vice names or Name Not Found (if names
cannot be obtained) are displayed.
# If this unit fails to find any available cellular phones, NOT FOUND is displayed.
3Touch the device name you want to connect.
While connecting, CONNECTING is displayed. To complete the connection, please check the device name (Pioneer BT unit) and enter the link code on your cellular phone. If the con- nection is established, CONNECTED is dis-
played.
# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 24.
Using a cellular phone to initiate a connection
Putting the unit in Connection open mode al- lows you to establish a Bluetooth wireless con- nection from your phone. You may need to refer to the operation manual that came with your phone if you are unsure how to initiate a connection from your phone.
1Touch PHONE CONNECT on the function menu.
2Touch CONNECTION OPEN.
The unit is now on standby for connection from cellular phone.
3Use cellular phone to connect to this
unit.
# Operation varies depending on the type of your cellular phone. Refer to the instruction man- ual that came with your cellular phone for de-
tailed instructions.
# You may need to enter the link code on your
cellular phone to complete the connection.
# The link code is set to 0000 as default. You can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con- nection on page 24.
12 En