Pioneer CD-BTB200 Before You Start About this manual, About Bluetooth, Resetting this unit

Section

01 Before You Start

About this manual

Operate this unit with the connected head unit. Instructions in this manual use AVH- P7800DVD as an example of head unit.

!When using with AVH-P6800DVD, refer to the operation manual supplied with it for operating instructions.

!When using the head units other than AVH-P7800DVD and AVH-P6800DVD, refer

to Using as an external unit on page 25. We recommend that you familiarize yourself with the functions and their operation by read- ing through the manual before you begin using this unit. It is especially important that you read and observe WARNINGs and CAU- TIONs in this manual.

About Bluetooth

Bluetooth is a short-range wireless radio con- nectivity technology that is developed as a cable replacement for mobile phones, hand- held PCs and other devices. Bluetooth oper- ates in 2.4 GHz frequency range and transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched by a special interest group (SIG) that comprises of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed by nearly 2 000 companies worldwide.

!The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks and

trade names are those of their respective owners.

Resetting this unit

CAUTION

Pressing RESET button of this unit with the igni- tion switch ON (ACC ON) erasing the contents of the unit’s memory.

Resetting this unit without erasing the data about phone

Pressing RESET button of this unit lets you reset the unit to its initial settings without erasing the data about phone. However the value of the following settings are cleared:

!PHONEBOOK NAME VIEW

!AUTO ANSWER

!REFUSE ALL CALLS

!RING TONE

!AUTO CONNECT

!ECHO CANCEL

When using as an external unit, the value of the following settings are cleared:

!automatic answering

!automatic connection

!ring tone

This unit must be reset under the following conditions:

!Prior to using this unit for the first time after installation

!When this unit and the head unit are re- connected

!If the unit fails to operate properly

!When strange or incorrect messages ap- pear on the display

!If there appear to be problems with the op- eration of the Hands-free Phoning function

1 Turn the ignition switch OFF.

6 En