Operating with different head units

Connecting a Bluetooth audio player

For this unit to control your Bluetooth audio player it needs to establish a Bluetooth wire- less connection.

This function initiates the connection via Blue- tooth wireless technology.

Important

When using this unit as an external unit, the PIN code is set to 0000. You can not change the PIN code. This unit can connect only the Bluetooth audio player which request 0000 as the PIN code or does not request any PIN code.

1 Put the unit in C.OPEN mode

Refer to Function compatibility charts on page 26.

This unit is now on standby for connection from Bluetooth audio player.

If your Bluetooth audio player is set ready for Bluetooth wireless connection, connection to this unit will be automatically established.

#Before you put the unit in C.OPEN mode NO AUDIO is displayed.

2Use the Bluetooth audio player to con- nect to this unit.

When the connection is established,

BT AUDIO is displayed.

# Operation varies depending on the type of your Bluetooth audio player. Refer to the instruc- tion manual that came with your Bluetooth audio

player for detailed instructions.

# You may need to enter the link code on your

Bluetooth audio player to complete the con- nection.

Disconnecting a Bluetooth audio player

When you are done using your Bluetooth audio player with this unit, you can close the Bluetooth wireless connection.

%Put the unit in DISCONN. mode.

Refer to Function compatibility charts on page 26.

After the disconnection is completed, NO AUDIO is displayed.

Section

05

English

En 33

Page 33
Image 33
Pioneer CD-BTB200 owner manual Disconnecting a Bluetooth audio player