Operating with different head units
Registering connected cellular phone
You can register a phone that is temporarily connected to this unit in order to take full ad- vantage of the features available with Blue- tooth wireless technology. Only one cellular phone can be registered.
1 Put the unit in REGIST mode
Refer to Function compatibility charts on page 26.
Before you put the unit in REGIST mode TEL is displayed.
2Use cellular phone to register to this unit.
When the registration is completed, TEL REG.
is displayed.
# Operation varies depending on the type of your cellular phone. Refer to the instruction man- ual that came with your cellular phone for de-
tailed instructions.
# You may need to enter the link code on your cellular phone to complete the connection.
Disconnecting a cellular phone
When you are done using your phone with this unit, you can close the Bluetooth wireless con- nection.
%Put the unit in DISCONN. mode
Refer to Function compatibility charts on page 26.
After the disconnection is completed, NO TEL is displayed.
|
|
|
| Section |
|
|
|
| 05 |
|
|
| ||
|
|
|
| English |
|
|
|
| |
Voice recognition |
|
|
If your cellular phone features voice recogni- tion technology, you can make a call by voice commands.
!Operation varies depending on the type of your cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions.
!This function can be operated only when the connection is established with HFP (Hands Free Profile).
1Put the unit in VOICE ON mode.
2Pronounce the name of your contact.
Setting the automatic answering
If this function is on, this unit automatically answers all incoming calls.
%Turn the automatic answering on or off Refer to Function compatibility charts on page 26.
The status will be displayed (e.g., ANSW ON).
En 31