Drypro model | Konica Minolta 752 instruction

LASER IMAGER

DRYPRO model 752

OPERATION MANUAL

CODE NO.

0463 (UL), 0467 (CE)

KONICACORPORATION

Image 1

Konica Minolta 752 operation manual Drypro model

Contents

Drypro model Blank DRY Laser Imager Drypro Model Operation environment IntroductionImaging environment Sorter LiS-752 is optional device Symbol mark Descriptions of symbol mark Descriptions of Symbol Mark Descriptions on warning caution label Descriptions on Warning LabelPage Front Rear Be sure to ground the device well Safety Caution Be careful not to trip over the power cable to damage it Plug the power cable completelyDo not operate the switches with wet hands When unplugging the power cable, do not pull it Disposal Precaution PrecautionPrecaution on Installation Location Main Body Name of Each ComponentFront View Rear View Sorter LiS-752 option Structure Control Panel How To OperateDescription on screen Start-up Operation Power saving mode Shut-down Operation When Start Timer is not set to on Touch OK to perform Operation OFF proce- dure When Start Timer is set to on Shut-down Operation Film Loading Resin tray Seals at the edges of the package Push the tray to the back until it is locked Film Loading Function of Maintenance Mode Maintenance Mode Start-up maintenance mode Switching Maintenance ModeShut-down maintenance mode Touch Maintenance Setting Start Timer Function How To Operate Maintenance Mode Setting Date/Time Time SET Re-printing Printed Page Previous Print Touch Previous Print on the maintenance menu screenTouch on the upper part of the screen Touch the box on the right of Copy and input the print count Density Touch a LUT name you wish to apply for printing MIN Density Touch Store Calibrating Density Calibration Calibration Touch Calibration on the maintenance menu screen Automatic calibration Test Print Selected user LUT name will be highlighted Touch OK How to control density Opening/closing front cover Cover Open Touch Cover Open on the maintenance menu screen Touch Exit Adjusting control panel Panel Adjust How To Operate Maintenance Mode Clearing queued print data Queue Clear Touch OK on the conﬁrm message Cold Start Touch Film Data on the maintenance menu screen Conﬁrming and setting ﬁlm count dataConﬁrming ﬁlm count data Weekly ﬁlm count Monthly ﬁlm count Touch Film Data Setup on the ﬁlm count data screen Setting ﬁlm count preference Touch Print Condition on the maintenance menu screen Setting print preference Print preference set screen 3/7 will appear Select the item to be printed as the stamp with Stamp Select Sets the format of date to be printed on the ﬁlm After the settings are complete, touch Exit Touch the user LUT name to be set on the LUT select screen Setting user LUTTouch LUT Library Touch the name of the LUT to be applied Creating user LUT Touch User LUT on the maintenance menu screenTouch Data on the lower part of the screen Conﬁrming the LUT curve Touch Edit on the LUT data screen Touch Power Save on the Maintenance Menu screen Setting power saving mode How To Operate Maintenance Mode Error Display and Remedy TroubleshootingError Code Description Remedy Error Display and Remedy Resetting Errors Touch Error Queue When an error cannot be reset Re-starting When Sorter Cover is displayed When Cover Open is displayedRemoving Jam Press in the tray until it locks Jam in tray Film outlet cover Green edge Film jam between Hpro section and cooling/discharge section Removing Jam Film jam in sorter Sorter left cover Cutouts When Film Fails to be Loaded Touch ON/OFF Line to switch into OFF Line Touch OK Touch Exit to end the maintenance mode When Film Fails to be Loaded Periodical Maintenance and Inspection Service and MaintenanceOuter cover of the main unit Inside of main unit Before replacing the FILTER, be sure to touch FIL Replacing Filter Other service and maintenance Service and Maintenance ScheduleServicing by a user Conﬁrming maintenance and maintenance display Drypro Model Speciﬁcations Sorter Option Speciﬁcations Time zone and code No. table Appendix Handling and Storage of Developed Film Handling and Storage of Unexposed Film Blank Blank