Removing Jam, When Cover Open is displayed | Konica Minolta 752

5-3.Removing Jam

5-3. Removing Jam

When ﬁlm jams occur during print, the error code and the description showing the details on the jam are displayed on the message column. [TRAY OPEN], [COVER OPEN], or [SORTER COVER] is displayed on the screen at the same time.

•When [TRAY OPEN] is displayed;

Touch [TRAY OPEN] to open the tray.

The screen on the right shows an example where a ﬁlm jam occurs in the upper tray.

The message of TRAY OPEN appears, then the tray pops out slightly.

When the tray pops out, the procedure of removing a jammed ﬁlm is displayed on the control panel.

•When [COVER OPEN] is displayed;

Touch [COVER OPEN] to open the front cover.

The screen on the right shows an example where a ﬁlm jam occurs between the exposure section (sub-scanning unit) and the elevator transport section.

The front cover will unlock after the message showing COVER OPEN appears.

When you open the front cover, the procedure of removing a ﬁlm jam for each location is displayed on the control panel.

•When [SORTER COVER] is displayed;

Touch [SORTER COVER].

The screen on the right shows an example where a ﬁlm jam occurs in the sorter.

After displaying the message for opening the sorter cover, the procedure of removing the sorter cover appears on the control panel.

52 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6

Image 64

Konica Minolta 752 operation manual Removing Jam, When Cover Open is displayed, When Sorter Cover is displayed

Contents

Drypro model Blank DRY Laser Imager Drypro Model Introduction Operation environmentImaging environment Sorter LiS-752 is optional device Descriptions of Symbol Mark Symbol mark Descriptions of symbol mark Descriptions on Warning Label Descriptions on warning caution labelPage Front Rear Safety Caution Be sure to ground the device well Be careful not to trip over the power cable to damage it Plug the power cable completelyDo not operate the switches with wet hands When unplugging the power cable, do not pull it Disposal Precaution PrecautionPrecaution on Installation Location Main Body Name of Each ComponentFront View Rear View Sorter LiS-752 option Structure Control Panel How To OperateDescription on screen Start-up Operation Power saving mode When Start Timer is not set to on Shut-down Operation When Start Timer is set to on Touch OK to perform Operation OFF proce- dure Shut-down Operation Film Loading Resin tray Seals at the edges of the package Push the tray to the back until it is locked Film Loading Maintenance Mode Function of Maintenance Mode Switching Maintenance Mode Start-up maintenance modeShut-down maintenance mode Touch Maintenance How To Operate Maintenance Mode Setting Start Timer Function Setting Date/Time Time SET Re-printing Printed Page Previous Print Touch Previous Print on the maintenance menu screenTouch on the upper part of the screen Touch the box on the right of Copy and input the print count Touch a LUT name you wish to apply for printing Density Touch Store MIN Density Calibration Touch Calibration on the maintenance menu screen Calibrating Density Calibration Automatic calibration Test Print Selected user LUT name will be highlighted Touch OK How to control density Touch Cover Open on the maintenance menu screen Opening/closing front cover Cover Open Adjusting control panel Panel Adjust Touch Exit How To Operate Maintenance Mode Clearing queued print data Queue Clear Touch OK on the conﬁrm message Cold Start Conﬁrming and setting ﬁlm count data Touch Film Data on the maintenance menu screenConﬁrming ﬁlm count data Weekly ﬁlm count Monthly ﬁlm count Setting ﬁlm count preference Touch Film Data Setup on the ﬁlm count data screen Setting print preference Touch Print Condition on the maintenance menu screen Print preference set screen 3/7 will appear Select the item to be printed as the stamp with Stamp Select After the settings are complete, touch Exit Sets the format of date to be printed on the ﬁlm Setting user LUT Touch the user LUT name to be set on the LUT select screenTouch LUT Library Touch the name of the LUT to be applied Creating user LUT Touch User LUT on the maintenance menu screenTouch Data on the lower part of the screen Touch Edit on the LUT data screen Conﬁrming the LUT curve Setting power saving mode Touch Power Save on the Maintenance Menu screen How To Operate Maintenance Mode Error Display and Remedy TroubleshootingError Code Description Remedy Error Display and Remedy Resetting Errors When an error cannot be reset Touch Error Queue Re-starting When Sorter Cover is displayed When Cover Open is displayedRemoving Jam Jam in tray Press in the tray until it locks Film outlet cover Green edge Film jam between Hpro section and cooling/discharge section Removing Jam Film jam in sorter Sorter left cover Cutouts When Film Fails to be Loaded Touch ON/OFF Line to switch into OFF Line Touch OK Touch Exit to end the maintenance mode When Film Fails to be Loaded Service and Maintenance Periodical Maintenance and InspectionOuter cover of the main unit Inside of main unit Replacing Filter Before replacing the FILTER, be sure to touch FIL Other service and maintenance Service and Maintenance ScheduleServicing by a user Conﬁrming maintenance and maintenance display Speciﬁcations Drypro Model Sorter Option Speciﬁcations Appendix Time zone and code No. table Handling and Storage of Unexposed Film Handling and Storage of Developed Film Blank Blank