Konica Minolta 752 operation manual Touch a LUT name you wish to apply for printing

4-3.How To Operate Maintenance Mode

(8)Touch a LUT name you wish to apply for printing.

The selected LUT name will be highlighted.

(9)Touch on the upper part of the screen.

The print preference set screen (2/3) will appear.

(10)Touch the key on the right of the setting item, then touch [$] / [%] to set the following items.

DENSITY	: Adjust the density of an image.
	Selectable from -7 to 7.
	Setting a negative value will make the den-
	sity lighter, and a positive value, darker.
CONTRAST	: Adjust the contrast of an image.
	Selectable from -7 to 7.
	Setting a negative value will make the con-
	trast lower, and a positive value, higher.
SMOOTH TYPE : Sets the smoothing type of an image.
SMOOTH TYPE		Settings
OFF		Does not perform the magnification
		interpolation.
1		Performs the Biliner interpolation.
2-6		Performs the Cubic Spline interpo-
		lation.
		Increasing the value will smooth an
		image greater.
7		Does not perform the magnification
		interpolation. But prints out in the
		MAGNIFICATION setting. When
		you wish to change this setting, ask
		a service person.

22 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6