Sorter left cover | Konica Minolta 752 instruction

5-3.Removing Jam

(3) Remove jammed ﬁlms if they remain.

(4) Lift the handle of the sorter left cover to remove it.

(5)Open the ﬁlm transport guide, and remove jammed ﬁlms if they remain.

Sorter left cover

Film transport

guides

DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 59

Image 71

Konica Minolta 752 operation manual Sorter left cover

Contents

Drypro model Blank DRY Laser Imager Drypro Model Sorter LiS-752 is optional device IntroductionOperation environment Imaging environment Symbol mark Descriptions of symbol mark Descriptions of Symbol Mark Descriptions on warning caution label Descriptions on Warning LabelPage Front Rear Be sure to ground the device well Safety Caution Do not operate the switches with wet hands Plug the power cable completelyBe careful not to trip over the power cable to damage it When unplugging the power cable, do not pull it Precaution on Installation Location PrecautionDisposal Precaution Front View Name of Each ComponentMain Body Rear View Sorter LiS-752 option Structure Description on screen How To OperateControl Panel Start-up Operation Power saving mode Shut-down Operation When Start Timer is not set to on Touch OK to perform Operation OFF proce- dure When Start Timer is set to on Shut-down Operation Film Loading Resin tray Seals at the edges of the package Push the tray to the back until it is locked Film Loading Function of Maintenance Mode Maintenance Mode Touch Maintenance Switching Maintenance ModeStart-up maintenance mode Shut-down maintenance mode Setting Start Timer Function How To Operate Maintenance Mode Setting Date/Time Time SET Touch on the upper part of the screen Touch Previous Print on the maintenance menu screenRe-printing Printed Page Previous Print Touch the box on the right of Copy and input the print count Density Touch a LUT name you wish to apply for printing MIN Density Touch Store Calibrating Density Calibration Calibration Touch Calibration on the maintenance menu screen Automatic calibration Test Print Selected user LUT name will be highlighted Touch OK How to control density Opening/closing front cover Cover Open Touch Cover Open on the maintenance menu screen Touch Exit Adjusting control panel Panel Adjust How To Operate Maintenance Mode Clearing queued print data Queue Clear Touch OK on the conﬁrm message Cold Start Weekly ﬁlm count Monthly ﬁlm count Conﬁrming and setting ﬁlm count dataTouch Film Data on the maintenance menu screen Conﬁrming ﬁlm count data Touch Film Data Setup on the ﬁlm count data screen Setting ﬁlm count preference Touch Print Condition on the maintenance menu screen Setting print preference Print preference set screen 3/7 will appear Select the item to be printed as the stamp with Stamp Select Sets the format of date to be printed on the ﬁlm After the settings are complete, touch Exit Touch the name of the LUT to be applied Setting user LUTTouch the user LUT name to be set on the LUT select screen Touch LUT Library Touch Data on the lower part of the screen Touch User LUT on the maintenance menu screenCreating user LUT Conﬁrming the LUT curve Touch Edit on the LUT data screen Touch Power Save on the Maintenance Menu screen Setting power saving mode How To Operate Maintenance Mode Error Code Description Remedy TroubleshootingError Display and Remedy Error Display and Remedy Resetting Errors Touch Error Queue When an error cannot be reset Re-starting Removing Jam When Cover Open is displayedWhen Sorter Cover is displayed Press in the tray until it locks Jam in tray Film outlet cover Green edge Film jam between Hpro section and cooling/discharge section Removing Jam Film jam in sorter Sorter left cover Cutouts When Film Fails to be Loaded Touch ON/OFF Line to switch into OFF Line Touch OK Touch Exit to end the maintenance mode When Film Fails to be Loaded Inside of main unit Service and MaintenancePeriodical Maintenance and Inspection Outer cover of the main unit Before replacing the FILTER, be sure to touch FIL Replacing Filter Servicing by a user Service and Maintenance ScheduleOther service and maintenance Conﬁrming maintenance and maintenance display Drypro Model Speciﬁcations Sorter Option Speciﬁcations Time zone and code No. table Appendix Handling and Storage of Developed Film Handling and Storage of Unexposed Film Blank Blank