Polycom VIEWSTATION EX manual dynamicbandwidth <yes|no|get>, Description, Examples

ViewStation EX, ViewStation FX, and VS4000 API Guide

Description

This command is used to configure DNS servers (up to 4 DNS servers can be configured). After a change is made, the system prompts the user for restart.

Note This option can only be set when DHCP is off.

set <{1..4}> Sets a DNS server when followed by the parameter xxx.xxx.xxx.xxx. If you want to erase the current setting, omit the parameter.

get <{1..4}> Displays the current IP address of the specified server (1..4).

1..4Range of selectable servers. xxx.xxx.xxx.xxxServer IP address.

Examples

dns set 1 192.168.1.111

dns get 4

User Interface Screen Location

System Info>Admin Setup>LAN/H.323>LAN/Intranet>

LAN & Intranet: DNS Servers

dynamicbandwidth

dynamicbandwidth <yesnoget>

Description

This command is used to specify use of dynamic bandwidth allocation for Quality of Service. The systems’ dynamic bandwidth function automatically finds the optimum line speed for a call. If you experience excessive packet loss while in a call, the dynamic bandwidth function decrements the line speed until there is no packet loss.This is supported in calls with endpoints that also support dynamic bandwidth.

yes Enables the option.

© Polycom, Inc. 2003 53