Polycom VIEWSTATION EX manual near move continuous, near move discrete, near tracking to_presets

ViewStation EX, ViewStation FX, and VS4000 API Guide

near move left Near camera direction change (start moving left). near move rightNear camera direction change (start moving right). near move up Near camera direction change (start moving up).

near move downNear camera direction change (start moving down)

near move stop Near camera direction change stops.

near move continuous

Switches near camera move mode to continuous mode. Camera will move in direction specified until a camera near move stop command is sent.

near move discrete

Switches near camera move mode to discrete mode. Camera will move a small, discrete amount in the direction specified and then stop. No “camera near move stop” command is required.

near stop Stops the near camera movement when in continuous mode.

near <setpositiongetposition> <x> <y> <z>

Sets or gets the x, y, and z coordinates of the currently selected ptz camera.

Camera ptz range:

-880 <= x <= 880 (pan) -300 <= y <= 300 (tilt)

0 <= z <= 1023 (zoom)

Note Some D30 cameras might not be able to reach the designed range limit. For example, although the pan limit is 880, the camera might only be able to reach 860.

near tracking on Turns on the near camera tracking mode. near tracking off Turns off the near camera tracking mode.

near tracking to_presets

Turns on the near camera tracking to presets. near tracking get Gets the near camera tracking mode.

© Polycom, Inc. 2003 33