Polycom VIEWSTATION EX manual pricallbycall <set|get>, Description, Example, 0..31

ViewStation EX, ViewStation FX, and VS4000 API Guide

pricallbycall

pricallbycall <setget> [{0..31}]

pricallbycall set [{0..31}] pricallbycall set pricallbycall get

Description

This command sets the PRI area code. Call-by-call is a number from 1 to 31, which is optionally sent to an upstream telephone company switch, if required. For example, specify a value of 6 for a T1 PRI network interface module that is directly connected to an ATT 5ESS switch, which is provisioned with Accunet. You must consult with the telephone company service provider to determine whether a call-by-call value is required for a particular PRI line. For most cases, the default value of 0 is correct. Always use the value 0 when connected to a PBX. A non-zero value should not be required in Europe. Values greater than 31 are reserved for internal use and must not be used

set	Sets PRI call-by-call when followed by a value from
	{0..31}. If you want to erase the current setting, omit the
	value.
get	Displays the current setting.
0..31	Range of call-by-call values.

Example

pricallbycall set 1

User Interface Screen Location

System Info>Admin Setup>Video Network>IMUX>PRI Network> PRI Setup>Advanced PRI Setup: Call-by-Call

This screen is only accessible if you have a PRI network interface connected to your ViewStation FX or VS4000 system.

© Polycom, Inc. 2003 181