Polycom VIEWSTATION EX advnetstats, User Interface Screen Location, Examples, Description, 0..2

ViewStation EX, ViewStation FX, and VS4000 API Guide

Note This command cannot be accessed through the RS-232 port.

set	Sets the password used for remote management of the
	system if followed by the password parameter. If you
	want to erase the current setting, omit the password
	parameter. The system must have an admin password
	set before this command works.
get	Displays the current admin password.
password	Valid characters are: a through z (lower and
	uppercase), -, _, @, /, ;, ,, ., \, 0 through 9. The length is
	limited to 10 characters.

Note Use quotation marks around a compound name or strings containing spaces (Ex: “united states” or “111 222 333”).

Examples

adminpassword set MyFXpsswd

adminpassword set “EX 2003“

User Interface Screen Location

System Info>Admin Setup>Security: Admin Password

advnetstats

advnetstats [{0..2}]

advnetstats

Description

This command is used to get advanced network statistics for each call.

0..2	Range of selectable calls in a multipoint call (maximum
	number of concurrent calls=3, where 0 is call #1, 1 is
	call #2, and 2 is call #3). Select a number from this
	range to specify a remote site call for which you want to
	obtain advanced network statistics.

18 www.polycom.com