Polycom VIEWSTATION EX streammulticastip, streamenable <yes|no|get>, Description, Example

ViewStation EX, ViewStation FX, and VS4000 API Guide

streamenable

streamenable <yesnoget>

Description

This command enables or disables streaming on the system.

yes	Enables streaming.
no	Disables streaming.
get	Displays the current setting (yes or no).

Example

streamenable yes

User Interface Screen Location

System Info>Admin Setup>LAN/H.323>Streaming: Allow Streaming

streammulticastip

streammulticastip <setget> ["ip address"]

streammulticastip set ["ip address"] streammulticastip set streammulticastip get

Description

This command sets the multicast IP address. A default address is entered for you based on your system’s serial number. This ensures that you do not have the same multicast address as another Polycom system. You can change this default address using this command.

set	Sets the multicast IP address when followed by the ip
	address parameter. If you want to erase the current
	setting, omit the parameter.

140 www.polycom.com