Polycom VIEWSTATION EX manual far subcommands, Camera source, far move continuous, far stop

Registers to receive feedback when the user changes the camera source.

ViewStation EX, ViewStation FX, and VS4000 API Guide

far subcommands

far 1..5 Selects a far camera as the main video source

(Camera source 1-5).

far source Returns the number of the camera source currently selected.

far move zoom+Far camera direction change (start zooming in). far move zoom- Far camera direction change (start zooming out). far move left Far camera direction change (start moving left). far move right Far camera direction change (start moving right). far move up Far camera direction change (start moving up). far move down Far camera direction change (start moving down). far move stop Far camera direction change stops.

far move continuous

Switches far camera move mode to continuous mode. Camera will move in direction specified until a ''camera far move stop'' command is sent.

far move discrete Switches far camera move mode to discrete mode. Camera will move a small, discrete amount in the direction specified and then stop. No ''camera far move stop'' command is required.

far stop	Stops the far camera movement when in
	continuous mode.

far tracking on Turns on the far camera tracking mode. far tracking off Turns off the far camera tracking mode.

far tracking to_presets

Turns on the far camera tracking to presets. far tracking get Gets the far camera tracking mode. register subcommand

register

unregister subcommand

unregister Unregisters to receive feedback when the user changes the camera source.

34 www.polycom.com