Polycom VIEWSTATION EX snapshot <0|1|2|3|4|register|unregister>, Example, Description, list

ViewStation EX, ViewStation FX, and VS4000 API Guide

list	List all loaded presentations (displays names and
	IP addresses) available for viewing. The names
	are the names of the PCs from which the
	presentations are loaded.

select <"pres">Selects slide presentation pres from the list by name. pres is generally the name of your computer on the network. This name appears in the pcPresent “Enter your Name” field.

password	Enters the presentation password.
start	Displays the first slide.
register	Registers the Telnet or RS-232 session to receive
	notifications about slides that are sent or received.
unregister	Unregisters the Telnet or RS-232 session to
	receive notifications about slides that are sent or
	received.

Note Use quotation marks around a compound name or strings containing spaces (Ex: “united states” or “111 222 333”).

Example

slides select presPC

snapshot

snapshot <01234registerunregister>

Description

This command sends a snapshot of the near site to the far site (or if 0 is specified, sends a snapshot of the far site to the near site if you are in a video call). If you are not in a call, it displays the snapshot on the near site until you clear it.

0Generates a snapshot from the far-site camera.

1Generates a snapshot from the near camera 1.

2Generates a snapshot from the near camera 2 (document camera).

130 www.polycom.com