Polycom VIEWSTATION EX cameradirection, camera4ptz <yes|no|get>, Description, Example, normal

ViewStation EX, ViewStation FX, and VS4000 API Guide

camera4ptz

camera4ptz <yesnoget>

Description

This command sets camera source 4 to pan-tilt-zoom mode. This command is specific to the VS4000 system.

Note See the command camerainput on page 37 to set your

	VS4000 camera source to S-video or composite mode.
yes	Enables pan-tilt-zoom mode.
no	Disables pan-tilt-zoom mode.
get	Displays the current setting (yes or no).

Example

camera4ptz get

User Interface Screen Location

System Info>Admin Setup>Video/Camera>Cameras>VS4000

Camera Setup

cameradirection

cameradirection <normalreversedget>

Description

This command selects whether the camera moves in the same direction (normal) as the arrows on the remote control or in opposite (reversed) direction.

normal	Sets the direction of the camera to normal.
reversed	Sets the direction of the camera to reversed.
get	Displays current settings (normal or reversed).

36 www.polycom.com