Polycom VIEWSTATION EX registerthissystem, queuecommands <yes|no|get>, Description, Example

ViewStation EX, ViewStation FX, and VS4000 API Guide

queuecommands

queuecommands <yesnoget>

Description

This command allows the system to queue up commands that cannot be processed during call progress or popup window states (that is, when the system is showing the call progress screen or is displaying a popup window). Once those states have cleared, the commands can be executed.

Note Certain commands can still be executed while the system is

	in a call progress or popup window state. They generally
	correspond to commands that can be sent via the remote
	control during those states (for example moving the camera
	or muting the microphone).
yes	The commands will be queued and then executed when
	the state has cleared.
no	The commands will be discarded and the system will
	proceed to the next command once the state has
	cleared.
get	Displays the current setting (yes or no).

Example

queuecommands yes

registerthissystem

registerthissystem <yesnoget>

Description

This command sets the system’s IP address to be registered and displayed in the Global Address Book (GAB) when the system is powered on. If you do not enable this option, the system has access

© Polycom, Inc. 2003 119