Aiwa Essential Remote Control and Usage Guide for CD Player TD39

Remote control (CSD-TD49 only)

Insert two R6 (size AA) batteries.

R6 (AA)

When the reach of the remote control signal is less than 5 meters (16 feet), replace the batteries.

The remote control may not operate correctly when:

-The unit is exposed to intense light, such as direct sunlight

-Objects block the remote control signal to the unit

To use the buttons on the remote control

Buttons on the remote control and the main unit with identical indications have the same functions.

To turn the power on

Press POWER to turn on the display.

When using the unit on the batteries, this button will not turn the power on.

To turn the power off

Press POWER to turn off the display.

To use the FUNCTION button

Each time FUNCTION is pressed while the power is on, the function is selected cyclically.

CD TAPE TUNER

FUNCTION

POWER

Specifications

Tuner section

Frequency range, antenna – FM: 87.5 - 108.0 MHz

Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz step) Ferrite bar antenna

Deck section

Track format – 4 tracks, 2 channels / Frequency range

–Normal tape: 50 - 12,500 Hz (EIAJ) / Recording system – AC bias / Erasing system – AC erase / Heads

–Recording/playback head (1), Erasure head (1)

CD player section

Disc – Compact disc / Scanning method – Non-contact optical scanner (semiconductor laser)

General

Speaker – 80 mm cone type (2) / Output – Headphones jack (stereo mini-jack) / Power output – 2.5 W + 2.5 W (EIAJ, 7 ohms, THD 10% DC) / Power requirements – DC 12 V using eight size C (R14) batteries, AC 120 V, 60 Hz / Power consumption – 16 W / Dimensions (W ⋅ H ⋅ D) – 306 ⋅ 155 ⋅ 253 mm (12 1/8 ⋅ 6 1/8 ⋅ 10 in.) / Weight (excluding batteries) – 2.5 kg (5 lbs. 8 oz.) / Accessories – Remote control (1, CSD-TD49 only), AC cord (1)

Specifications and external appearance are subject to change without notice.

COPYRIGHT En

Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used.

If an erroneous display or malfunction occurs

Turn off the unit and press POWER 6 STANDBY/ON while pressing s.

If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display.

Leave the unit for a while and turn the power back on.

ENGLISH 5