
\PHONES
VOLUME N,M |
e PLAY/PAUSE |
POWER 6STANDBY/ON |
f, g |
(TUNING |
s STOP/SET/CLEAR |
PRESET |
RADIO BAND |
REPEAT/MODE/ |
SLEEP |
A TUNER OPERATION
1 Press RADIO BAND * repeatedly to select the desired band.
FM AM
The power is turned on and the previously tuned station is received.
*or BAND on the remote control (applicable when the AC cord is connected,
REPEAT/MODE/SLEEP *
- If an FM stereo broadcast contains noise, press the
button so that is displayed.
Noise is reduced, although reception is monaural. To restore stereo reception, press the button again.
- If a
* or MODE on the remote control
2 Press f, g (TUNING -, +) to select a station.
During FM stereo reception, is displayed.
After listening, press POWER 6 STANDBY/ON to turn the power off.
For better reception
FMAM
To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/ step. If you use the unit in an area where the frequency allocation system is 9 kHz/step, change the interval as follows.
1Press RADIO BAND.
2Press POWER 6 STANDBY/ON while pressing
RADIO BAND.
When the AM tuning interval is changed, the preset stations are cleared.
Extend the rod antenna and orient it for the best reception.
The antenna is inside the unit. Position the unit for the best reception.
NOTE
If the unit picks up noise from other electrical appliances nearby, like a TV or fluorescent lights, move the unit.
For quick tuning (Auto Search)
Keep f, g pressed until the tuner starts searching for a station. When a station is tuned to, the search stops.
If the broadcast signal is weak, it does not stop. To stop the search manually, press f or g.
To listen with the headphones
Connect headphones with a stereo mini plug to the
\PHONES jack on the rear of the unit.
6ENGLISH