POWER 6STANDBY/ON
CD
e PLAY/PAUSE
f, g
s STOP/SET/CLEAR
REPEAT/MODE/ SLEEP
B CD OPERATION
1 Press CD.
The power is turned on.
2 Press PUSH OPEN to open the disc compartment. Place a disc with the printed side up and close the disc compartment.
PUSH OPEN
Total number of tracks and total playing time are displayed. It will take about 15 seconds when loading a
3 Press e PLAY/PAUSE to start play.
The number of the track being played and elapsed playing time are displayed.
s STOP/SET/CLEAR * – Stops play.
*or s STOP on the remote control
f, g – Searches for a particular point during playback. Hold down f or g and then release it.
– Skips to the beginning of a track. Press f or g repeatedly.
To start play when the power is off, press CD. The power is turned on and play of the loaded disc begins (Direct Play Function).
If you load a disc while the display flashes in step 2, play starts without pressing e.
To select a track directly with the remote control
Example:
To select number 25, press +10, +10 and 5. To select number 10, press +10 and 0.
After listening, press POWER 6 STANDBY/ON to turn the power off.
NOTE
•Do not use irregular shape CDs (example: heart- shaped, octagonal ones).
It may result in malfunctions.
•Do not place more than one disc in the disc compartment.
•Do not try to open the disc compartment during play.
•Do not touch the lens. Doing so may cause malfunctions.
•The unit may not play a
•Do not attach any seal or label to either side (the recordable side or the labeled side) of a
•Do not load an unrecorded
8ENGLISH