Zebra Technologies P1043301-005 manual Defaulting the Print Servers on the HC100 Printers

78

Getting Started

Defaulting ALL Print Servers

Defaulting the Print Servers on the HC100 Printers

To default the print server to factory settings, complete these steps:

1.Press and hold Feed for two seconds.

Note • Be sure to count the number of LED blinks. The three blink sequence defaults only the print server parameters while the four blink sequence defaults all of the printer parameters.

2.Wait for the three blink sequence of the Error/Status LED.

3.Release Feed.

Defaulting the Print Servers on the 105SL, PAX4, Xi4, ZE500, and 105SLPlus Printers

To default the print server to factory settings, complete these steps:

1.From the control panel, press SETUP/EXIT two times.

2.Press PLUS (+) five times.

The control panel will read DEFAULT NET.

3.Press NEXT/SAVE to save the change.

The control panel will read PRINTER READY.

P1043301-005 11/21/13