Zebra Technologies P1043301-005 manual Compact Flash Wireless Radio Card

Installation

Install a Radio Card in a Wireless Print Server

39

Compact Flash Wireless Radio Card

This section applies to Compact Flash wireless radio cards, which require an adapter before they can be used in the wireless option card slot.

To install a Compact Flash wireless radio card and adapter, complete these steps:

1.If you have not already done so, turn off (O) the printer.

2.Remove and discard the metal cover that was shipped in place over the wireless option slot on the back of the printer.

3.See Figure 3. Position the adapter with the back facing as shown. Insert the adapter into the wireless option card slot on the back of the printer until the card-eject button pops out.

4.See Figure 3. Insert the Compact Flash wireless radio card into the adapter.

Figure 3 • Installing a Compact Flash Wireless Radio Card

4

3

2

1

1Back of Compact Flash wireless radio card

2Back of adapter

3Wireless option card slot on back of printer

4Card-eject button

11/21/13 P1043301-005