34

Installation

External ZebraNet 10/100 Print Server

External ZebraNet 10/100 Print Server

This section provides you with an illustration of the external ZebraNet 10/100 Print Server and the steps required for its installation. For a list of compatible printers, see Hardware — Wired Print Servers on page 22.

Before You Begin

Important • In order to take advantage of all features described in this manual, you must download firmware X.14 or later.

Note • Not all printers support firmware X.14 or later. On those printers, the features for this print server will be limited.

To upgrade you printer firmware, complete these steps:

1.If your printer has firmware x.12 firmware, you must upgrade your printer firmware to version x.14.x or higher.

2.To upgrade your firmware, visit the Zebra Web site: www.zebra.com/firmware

3.Confirm that the upgrade was successful:

If...

Then...

 

 

Your printer has an LCD

Look at the lower right-hand corner and confirm the

 

version of firmware that is on your printer.

 

 

Your printer does not have

Print out a configuration label to see the version of

an LCD

firmware that is on your printer.

P1043301-005

11/21/13

Page 32
Image 32
Zebra Technologies P1043301-005 manual External ZebraNet 10/100 Print Server, Before You Begin