Firmware Upgrade: To update the device firmware, enter the firmware path and password (if necessary), and click “Start”.).

Figure 12 – Firmware Upgrade

Web Access: Double click the device in the Monitor List or select a device in the Monitor List and press the “Web Access” button to open the Web-based Utility. To see the list of web browsers the Web-based Utility supports, see Supported web browsers on page 22.

DHCP Refresh: select a device in the Monitor List and press the “DHCP Refresh”, and enter the password (if applicable) to trigger the Web-Smart Switch to request an IP address from a DHCP Server.

Figure 13 – DHCP Refresh

29

Page 32 Page 34
Page 33
Image 33
D-Link DES-1228P user manual Firmware Upgrade
Page 32 Page 34
Top Page Image Contents