Zebra Technologies Troubleshooting the ZebraNet 10/100 Print Server: A Complete Guide

Hardware Troubleshooting

Troubleshooting the Internal ZebraNet 10/100 Print Server

137

Troubleshooting the Internal ZebraNet 10/100 Print Server

Resetting the Internal ZebraNet 10/100 Print Server to Factory Defaults

Which model printer do you have?

If you have a…	Then…
ZM400 or ZM600	Go to Defaulting the Print Servers on the ZM400 and ZM600
printer	Printers on page 77.
G-Series, ZP Series, or	Go to Defaulting the Print Servers on the ZP Series, LP/TLP
LP/TLP 2824 Plus	2824 Plus, and G-Series Printers on page 77.
printer
HC100 printer	Go to Defaulting the Print Servers on the HC100 Printers
	on page 78.
105SL, PAX4,	Go to Defaulting the Print Servers on the 105SL, PAX4, Xi4,
Xi4, ZE500, and	ZE500, and 105SLPlus Printers on page 78.
105SLPlus
printer/print engine
ZT210 and ZT220	Go to Defaulting the Print Servers on the ZD500R, ZT210,
printer	ZT220, ZT230, ZT410, and ZT420 Printers on page 79.
ZT230 printer	Go to Defaulting the Print Servers on the ZD500R, ZT230,
	ZT410, and ZT420 Printers via the Control Panel on page 79.

Internal ZebraNet 10/100 Print Server Network Status and Activity Indicators

For the S4M, 105SL, and PAX4 Printers/Print Engines

Alongside of the RJ45 connector, there are two LED’s containing a red element and a green element. By turning on and off different combinations of these two LED elements, the LED indicates Ethernet links, activity, and speed.

Network Status LED State			Description
Off	No Ethernet link detected
Amber	10	Mbps link detected
Amber, blinking	10	Mbps link detected and Ethernet activity detected
Green	100		Mbps link detected
Green, blinking	100		Mbps link detected and Ethernet activity detected

11/21/13 P1043301-005