Zebra Technologies P1043301-005 manual View Wireless Status through the Control Panel

52

Getting Started

View Wireless Status through the Control Panel

View Wireless Status through the Control Panel

After the wireless print server is configured, you may view the wireless status on the printer’s control panel in many cases.

•Printers with an LCD display text or symbols (see LCD Link Status and Wireless Signal Indicators).

•The HC100 printer does not have an LCD, so the wireless status is indicated by the control panel lights (see HC100 Wireless Status Indicator Lights on page 54).

•The ZT210, ZT220, and ZT230 printers also use control panel lights to indicate the wireless status (see ZT210, ZT220, ZT230, ZT410, and ZT420 Wired and Wireless Status Indicator Lights on page 55).

Note • Refer to the User Guide for your printer for specific instructions on how to use the control panel.

LCD Link Status and Wireless Signal Indicators

This section applies to printers and print engines other than the HC100, ZT210, ZT220, and ZT230 printers.

Link Status Indicator The wireless link status indicator appears at the bottom left of the LCD, providing a real-time display of the printer’s network status (Table 10).

	Table 10 • Link Status Indicators
Status Indicator	Meaning
cycling through characters	The wireless radio card is associated with the WLAN.
. o O
underscore	• The wireless radio card is not associated with the WLAN. Verify that
_	your printer’s wireless settings match those of the WLAN.
	• The firmware on the wireless radio card may need to be updated. See
	Supported Wireless Radio Cards on page 17 for the required firmware
	versions.
blank	• The printer is checking for a wired print server.
	• The printer is running a wired print server.
	• The wireless print server board is not installed or not installed correctly.

P1043301-005 11/21/13