Zebra Technologies P1043301-005 manual Memory Requirements

24

Introduction

Printer Requirements

Memory Requirements

PCMCIA and Compact Flash Memory Cards PCMCIA memory or Compact Flash memory cards will not work and are not supported on the Wireless Plus Print Server. The Internal Wireless Plus Print Server and the b/g Print Server do not include a slot for these card types.

Wireless Card Socket Option The ZebraNet wireless print server options replace the Wireless Card Socket Option (WCSO) in 105SL printers with a serial number of 6400357 or greater. Do not install a wireless option board on a 105SL printer with a serial number that is less than 6400357.

Wireless Option Board A special wireless option board must be installed in your printer/print engine. To determine if you have a wireless option board installed, use a printer configuration label (refer to the “Printing Configuration Labels” section in your User Guide). To purchase a wireless option, contact your authorized Zebra reseller for more information.

The wireless option boards are identified by the HARDWARE ID line on the printer configuration label.

The part numbers shown on the HARDWARE ID line indicate the wireless print servers as shown in Table 6.

Table 6 • Zebra Part Numbers for ZebraNet Wireless Print Server

Boards

Part Number	Corresponds to the Following
P1033782-0x	n Print Server
	(radio included)
P1033557-0xx	b/g Print Server
	(radio included)
P1033605-001
29652-0xx	Internal Wireless Plus Print Server
	(radio included)
29883-001
29651-0xx	Wireless Plus Print Server
	(requires a third-party radio card)
29882-001
29881-009	Wireless Print Server
	(requires a third-party radio card)
79077
79078
79079
79100

P1043301-005 11/21/13