Zebra Technologies P1043301-005 manual Checking Print Server Configuration Settings

68

Getting Started

Checking Print Server Configuration Settings

9.If you selected email for your destination, enter a valid email address to which your messages will be sent.

To receive email alert, you must give your print server the IP address of your mail server running SMTP. For instructions, refer to Status and Configuration on page 112.

10.If you selected TCP or UDP for your destination, enter the Port Number.

Important • A password is required. If you forget to enter the password, the alerts you just set are deleted.

11.Click Add Alert Message.

12.To save current settings, click Save Printer Setting.

13.Enter the password and click Save Current Configuration.

Checking Print Server Configuration Settings

This section provides steps on how to check the print server configuration settings using ZebraNet Bridge and a browser.

Using ZebraNet Bridge

ZebraNet Bridge may be used to check the print server configuration settings. Refer to the ZebraNet Bridge Enterprise User Guide for more detailed information.

P1043301-005 11/21/13