Zebra Technologies P1043301-005 manual 144

144

Hardware Troubleshooting

General Wireless Issues

Table 24 • General Issues and Recommended Solutions (Continued)

Issue	Possible Cause		Recommended Solution
My wireless connection	An access point may be bad. The		Check the access points on your WLAN,
is inconsistent. The	card appears to be switching		particularly the one closest to the printer.
signal strengths change	affiliations between access points.
back and forth between
	The wireless radio card is		Check the access points on your WLAN to
high and low numbers.	repeatedly associating with two or		determine what is causing the signal
	more access points because of		strengths to vary.
	varying signal strengths.
My “n” Print Server is	You have not set the region code		If you are operating outside of the three
not operating on the	and are located in a country other		countries listed, you must send a specific
5Ghz band.	than:		Set-Get-Do command to set your country
	•	United States	code. For specific command information,
	•	Canada	see the Programming Guide for ZPL II,
			ZBI 2, Set-Get-Do, Mirror, and WML.
	•	Japan

P1043301-005 11/21/13