Zebra Technologies P1043301-005 manual Install a Radio Card in a Wireless Print Server

38

Installation

Install a Radio Card in a Wireless Print Server

3.Position the notch on the wireless radio card on the top, leading edge. Insert the wireless radio card into the wireless option card slot on the back of the printer until the card-eject button pops out.

4

2 3

1

1Wireless radio card

2Notch

3Wireless option card slot on back of printer

4Card-eject button

4.Place the RF card cover over the wireless radio card, and secure it with a small screw.

Note • The S4M, ZM400, ZM600, RZ400, and RZ600 printers do not use the RF card cover.

3

2

1

1Clear plastic RF card cover (not used on all printers)

2Screw

3Wireless radio card

5.Turn on (I) the printer.

The printer restarts and uses the wireless radio card to communicate with your WLAN. Allow several minutes for the printer to connect to the network. For more information about wireless status, refer to View Wireless Status through the Control Panel on page 52 or Troubleshooting the Wireless Print Server on page 139.

P1043301-005 11/21/13