Zebra Technologies P1043301-005 manual Getting Started

Getting Started

Defaulting ALL Print Servers

Defaulting the Print Servers on the ZD500R, ZT210, ZT220, ZT230, ZT410, and ZT420 Printers

1.Turn off (O) the printer.

2.Press and hold the Pause and Cancel keys and turn on (l) the printer.

3.Hold the Pause and Cancel keys until the first status indicator light turns off.

4.Which type of print server do you have?

If you have a…	Then, you will see one of the following conditions…
Wired print server	a.	Steady green Network status indicator: A 100Base-T link was
		found.
	b. Steady yellow Network status indicator: A 10Base-T link was
		found.
	c.	Steady red Network status indicator: No network link was
		found.
Wireless print	a.	Steady green Network status indicator: A wireless network
server		was found. Your print server has successfully associated with
		and been authenticated by the wireless network.
	b. Steady red Network status indicator: No network link was
		found.
		Note • If you reset your wireless print server, the ESSID
		setting will change to “125” and all encryption and
		authentication settings will be disabled. The wireless print
		server settings should be reconfigured to match your
		wireless network settings.

For more information on status indicators, see ZT210, ZT220, ZT230, ZT410, and ZT420 Wired and Wireless Status Indicator Lights on page 55.

Defaulting the Print Servers on the ZD500R, ZT230, ZT410, and ZT420 Printers via the Control Panel

Refer to the User Guide for your printer for specific instructions on how to use the control panel.

79

11/21/13 P1043301-005