Zebra Technologies P1043301-005 manual Troubleshooting the External 10/100 Print Server, 134

134

Hardware Troubleshooting

Troubleshooting the External 10/100 Print Server

Troubleshooting the External 10/100 Print Server

Resetting to Factory Defaults

Note • You must have an active network cable connected to the external ZebraNet 10/100 Print Server device to default the device using the Test button.

See Defaulting the ZebraNet 10/100 Print Server on the 105SL, S4M, PAX4, and External Devices on page 76.

External ZebraNet 10/100 Print Server Network Status and Status Indicators

Alongside of the RJ45 connector, there are two LED’s containing a red element and a green element. By turning on and off different combinations of these two LED elements, the LED indicates Ethernet links, activity, and speed. For indicator locations, see Figure 1, External ZebraNet 10/100 Print Server, on page 35.

Network Status LED State	Description
Off	No Ethernet link detected
Amber	10 Mbps link detected
Amber, blinking	10 Mbps link detected and Ethernet activity detected
Green	100 Mbps link detected
Green, blinking	100 Mbps link detected and Ethernet activity detected
Status LED State	Description
Green, solid	Print server is working.
Green, flashing	For solutions, see Table 22 on page 135.
Red, solid	For solutions, see Table 22 on page 135.
Red, flashing	For solutions, see Table 22 on page 135.
Alternating Red/Green	For solutions, see Table 22 on page 135.

P1043301-005 11/21/13