Zebra Technologies P1043301-005 manual Assigning an IP Address on any Print Server

60

Getting Started

Assigning an IP Address on any Print Server

Assigning an IP Address on any Print Server

Before you can begin working with a print server, you must get or assign an IP address for the print server device.

The four different ways to assign an IP address are:

•DHCP

•ZebraNet Bridge

•Printer Control Panel/LCD

•Telnet

Important • For specific information on the default User ID and/or default password, see Default User ID and Password on page 43.

With Dynamic Host Configuration Protocol (DHCP)

If your network uses DHCP, your print server device is assigned a temporary IP address.

Note • Check with your Network Administrator to see whether your network uses DHCP.

Assigning an IP Address Without DHCP via ZebraNet Bridge

ZebraNet Bridge may be used to set the IP address. Refer to the ZebraNet Bridge Enterprise User Guide for more detailed information.

P1043301-005 11/21/13