Zebra Technologies P1043301-005 manual Label Width, 211 63.5 150 127.00

44

Getting Started

Printing a Configuration Label — External ZebraNet 10/100 Print Server

Printing a Configuration Label — External ZebraNet 10/100 Print Server

Before you begin, you need to get information from the external ZebraNet 10/100 Print Server configuration label.

Important • Make sure the printer is turned off (O).

In order to print the external ZebraNet 10/100 Print Server configuration label, the correct media size must be loaded in the printer. For specific information on media sizes, see Table 8.

Table 8 • Label Width

DPI	Inches	mm
600	1.63	41.28
300	1.63	41.28
211	2.5	63.5
150	5.0	127.00

To print an external ZebraNet 10/100 Print Server configuration label, complete these steps:

1.Turn on (I) the printer and let it complete its power-up cycle.

2.When the POST cycle is complete, press the Test button and hold it in for a few seconds before you release it.

An external ZebraNet 10/100 Print Server configuration label prints. Your configuration label looks similar to Figure 6 on page 45.

P1043301-005 11/21/13