Huffy 21168202 manual Parts List See Hardware Identifier

PARTS LIST - See Hardware Identifier

Item	Qty.	Part No.	Description	Item	Qty.	Part No.	Description
1	1	908123	Top Pole Section	28	2	900183	Elevator Tube, Lower-Long
2	1	908125	Middle Pole Section	29	1	204837	Spring
3	1	908124	Bottom Pole Section	30	2	904807	Elevator Tube, Upper-Short
4	2	202800	Ground Sleeve	31	2	201129	Spacer, Metal .402 I.D. x .50 O.D. x 1.8
5	1	202801	Ground Sleeve Cap	32	1		Rim
6	1	204832	Bracket, Pole Mount	33	12*	201219	Smart Clip
7	2	203053	Carriage Bolt, 5/16-18 x 4 Long	34	1	204281	Net
8	9*	203100	Hex Flange Nut, 5/16-18	35	1	201251	Label, Height Adjustment
9	3*	206360	Bolt, Hex Head, 3/8-16 x 2-5/8 Long	36	1	203279	Anti-Skid Tape
10	4	203232	Washer, Metal, 3/4” O.D.	37	1	204855	Handle, Left
11	4	203063	Nut, Nylock, Hex Head, 3/8-16	38	1	204856	Handle, Right
12	2	204858	Spacer, Biscuit, Plastic	39	2	201683	Spacer, Black, 1.5 Long
13	2	204857	Spacer, Metal 1/2” O.D. x 1.44 Long	40	1	206990	Bracket Reinforcement
14	2	204859	Cover, Pin Assembly	41	1	900033	Slam Jam Bracket, Black
15	3*	203038	Carriage Bolt, 5/16-18 x 2-3/4 Long	42	1	203796	Bolt, “Tee” 3/8 - NC x 5 Long
16	1	204850	Pin, Locking	43	1	200318	Bracket Reinforcement, Slam Jam
17	1	204853	Lanyard, Black Coil	44	1	203472	Spring, Black
18	1	908152	Height Adjustment Rod	45	1	203470	Washer, Flat 5/8 I.D. x 1-1/2 O.D.
19	1	204872	Label, Height Indicator	46	1	203795	Nut, Special 3/8-NC
20	2	203103	Carriage Bolt, 5/16-18 x 2 Long	47	4	201611	Bolt, Hex-Flange 5/16-18 x 3" Long
21	1	204803	Screw, Phillips Head	48	1	240017	Bolt, Hex, 1/4-20 x 2-1/4 Long
22	4	202862	Spacer, .563 ID x 1.190 Long	49	1	240027	Nut, Hex, Nylock, 1/4-20
23	4	206311	Spacer, .53 I.D. x .65 O.D. x .5 Long	50	1	903601	Rebar
24	6	206340	Lock Nut,1/2-13	51	2	204159	Rebar Centering Spacer
25	2	900846	Board Bracket	52	2	200533	Spacer, Board Mounting, Plastic
26	1	207103	Cap,Pole, 3.5" X .75"	53	4	205528	Bolt, Hex Flange, 5/16-18 x 1" Long
27	6	206244	Bolt, Hex Head 1/2-13 x 8 Long	54	1	206118	Label, Warning

* YOU MAY HAVE EXTRA PARTS WITH THIS MODEL.

NOTICE TO ASSEMBLERS

ALL Huffy Sports Basketball Systems, including those used for DISPLAYS, MUST be assembled and ballasted with sand, water or concrete according to the instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift weight system.

IMPORTANT!

Remove all contents from boxes.

Be sure to check inside pole sections; hardware and additional parts are

packed inside.

WARRANTY CARD:

Please remember to complete your product registration form either on-line at: www.huffysports.com or mail-in the enclosed postcard.

For more information on assembly, placement, proper use, and maintenance, visit The American Basketball Council website at http://www.smarthoops.com.

P/N 21168202 10/04 4