Life Fitness SM22 Parts List, Weight Stack Sticker Placement, Weight plate stickers, Description

SM22 Assembly Instructions

WEIGHT STACK STICKER PLACEMENT

The figure below shows where to place the weight stack stickers. The row of lower weight plate numbers needs to go above the “Lighter” sticker and the row of higher weight plate numbers need to go above the “Heavier” sticker. The sticker edge should be placed 1-1/4” from the center of the pin holes.

1.25”	1.25”
2.5	5
5.0	10
7.5	15
10.0	20
12.5	25
15.0	30
17.5	35
20.0	40
22.5	45
25.0	50
27.5	55
30.0	60
32.5	65
35.0	70
37.5	75
40.0	80
42.5	85
45.0	90
47.5	95
LIGHTER	HEAVIER

Figure 5. Weight plate stickers.

To apply the weight plate stickers:

1.Peel off the backing.

2.Line up sticker backing edge with holes as shown in the figure. Make sure the sheet of labels is straight.

3.Press down each sticker.

4.Slowly and carefully remove the top strip. Make sure each plate number is left behind.

PARTS LIST

Description	Part Number	Quantity
Caplug washer	0017-00104-0368	24
3/8” x 2-3/4” hex bolts	0017-00101-1408	12
3/8” Nyloc nut	0017-00103-0217	12
Caplug cap	0017-00042-0969	24

6