ADTRAN 25 manual Error Message, Action = 3 Data =

APPENDIX F: Administration Error Messages

	ERROR MESSAGE
	AND DESCRIPTlON		POSSIBLE SOLUTION
1017:	inappropriate	request	Cap already installed
	system already has Direct		ACTION = 1 (Cap)
	C A P
			Go to MENU 8 (Searches)
			ACTION = 1 DATA = 18
			ACTION = 2 DATA = 309 or 310
			ACTION = 3 DATA = 0
1 0 1 8 :	inappropriate	request	Must remove secondary CAP before
	must remove	secondary	attempting to remove the first CAP.
	CAP first
1 0 1 9 :	incorrect action number		Check if the ACTION value taken is
	does not exist or used		legal.
	improperly
1 0 2 0 : inappropriate request			Trying to administer features to a
	primary or secondary		secondary CAP that does not exist.
	CAP does not exist
1021:	at installed max		At the maximum number of stations
	-200 stations		allowed by the system.
1022:	at installed max		At the maximum number of trunks
	-104 trunk		allowed by the system.
1023:	button function code		Button station out of range for
	out of range		terminal type code. Check station
	does not exist or used		for button range. (invalid button
	improperly		function code)
1024:	at installed max		At system maximum of 300 FPDCs.
	-300 FPDCs
1025:	at installed max -199		At system maximum of 199 EMT
	EMT sets		s e t s .
1026:	at installation max		Maximum of 111 ATL sets, 2 of
	-96 ATL set		which have to be CAPS
1027:	at installed max		At system maximum of 104
	-104 trunk		ground-start trunks.
1028:	at installed max		At system maximum of 104 loop-
	-104 trunk		start trunks.
1029:	at installed max		At system maximum of 104 DID
	-104 trunk		t r u n k s .
1030:	at installed max		At system maximum of 32 TIE
	-32 Tie trunk		trunks.

F-3