INSTALLATION

4.Complete the Voice and Data Station Records Form (Figure 2-26).

Make SIP Connections to Cabinet for ATL Cordless Telephones

Follow the same procedure as for 7300H Series terminals to connect ATL Cordless Telephone SIP appearances to the appropriate CPs as outlined below:

Connect the 25-pair connector to a ZTN79 CP

Attach a cable label to the octopus cable 25-pair connector and flag-type tie wrap

Run the cable to the 50A Fanning Strip

Plug cable ends into the appropriate SIP adapters

Complete the Voice and Data Station Records Form.

Perform SIP Housekeeping

Before continuing, make the SIP wiring neat:

1.Make sure that the cables connecting the SIP to building wiring run neatly through the rings at the top of the SIP. Check that all building wiring cables connected to an adapter are run through the two adjoining purse-lock clips and that the clips are twisted closed.

2.Bundle and tie by circuit type all octopus cable ends not connected to the SIP. Place unused octopus ends for each cable in a plastic bag and tie the bagged ends to one of the cables connected to the SIP.

3.Make sure that octopus cables hang between the two cable management posts at the bottom of each column of adapters.

4.Check that the octopus cables are properly dressed through the fanning strips (Figure 2-31 ) and that the cables hang neatly between the fanning strip and 617A Panels. Do not bundle and tie wrap octopus cables between the fanning strip and SIP unless they are unused.

5.Check that all octopus cables are run through the D-rings between the fanning strips and the cabinet.

2-76

Page 101
Image 101
ADTRAN 25 manual Make SIP Connections to Cabinet for ATL Cordless Telephones, Perform SIP Housekeeping