ADTRAN 25 manual Make SIP Connections to Cabinet for MET Sets

INSTALLATION

Make SIP Connections to Cabinet for MET Sets

Follow the same procedure as for 7300H Series terminals to connect MET set SIP appearances to the appropriate CPs as outlined below:

●Connect the 25-pair connector to a TN735 CP

●Attach a cable label to the octopus cable 25-pair connector and flag- type tie wrap

●Run the cable 10 the 50A Fanning Strip

●Plug cable ends into the appropriate SIP adapters

●Complete the Voice and Data Station Records Form.

Note: Each TN735 CP supports only four MET sets. Therefore, only the first four modular plugs on each octopus cable should be connected to the SIP adapters.

Make SIP Connections to Cabinet for Single-Line Sets

Follow the same procedure as for 7300H Series terminals to conned single-line voice terminal SIP appearances to the appropriate CPs as outlined below:

●Connect the 25-pair connector of the octopus cable to a ZTN78 CP

●

●

●

Attach a cable label to the octopus cable 25-pair connector and flagtype tie wrap

Run the cable to the 50A Fanning Strip

Plug the cable ends into the appropriate adapters, and complete the Voice and Data Station Records Form.

For extended, off-premises, and out of-building stations, follow the same procedure as above, except connect the octopus cable to a TN742/TN746 CP. For Connection to a TN746 CP, follow the procedure outlined below.

●Attach the connector marked “0’ of the 853B adapter to a TN746 CP ("0")

2-74 November 1995