MAINTENANCE

6.Enter 9 (for the SAVE/RESTORE selection) and press <RETURN>.

7.The system responds with:

A c t i o n =

8.Enter 10 for a warm restart.

The system responds with:

Save/Restore: Action=10 Data=.

9.Enter D.

The system responds with: D a t a =

10.Enter 1.

The system responds with:

Save/Restore: Action=10 Data=1

YOU ARE ABOUT TO FORCE A WARM START c to continue, any other key for abort.

11.Enter c to initiate the warm restart.

To perform a cold restart, follow the preceding steps for Restarting the System, except enter 20 after Action=. Enter 1 or 2 after Data=. (Data=1 , initiates a “full default” cold start; Data=2 initiates a limited cold start. See the Administration Manual, 555-540-500, for a listing of default translations provided by the system.

The system responds with:

Save/Restore: Action=20 Data=1 (or Data=2)

YOU ARE ABOUT TO INITIATE A COLD START

c to continue, any other key to abort.

Enter c to initiate the cold restart.

If you make any typing errors while entering information, press the backspace key. Each time you press <BACKSPACE>, one character is e r a s e d .

4-24

Page 200
Image 200
ADTRAN 25 manual YOU are about to Initiate a Cold Start