SYSTEM TESTS

TEST ATTENDANT CONSOLE

Testing the attendant console is the same as testing a multiline voice terminal, except for testing the console’s unique feature buttons.

1.Perform all the steps in “Test 7300H Series Voice Terminal” in this section.

2.Verify that all attendant features are working properly.

3.If any features are not working or not working properly, verify the

translations through SAT.

.

TEST SELECTOR CONSOLE

At each selector console, check that all selector console LEDs are operational. Place a call to a voice terminal in the system.

1.Press the Test button on the console (the rightmost of the eight group buttons on the bottom row). This initiates test mode A.

Each LED lights in sequence.

2.Press the Test button (or any other button) again. This initiates test mode B.

Each LED lights as its associated button is pressed.

3.Press the Test button again to exit the test mode.

4.Go off-hook at the attendant console.

5.With the correct group select button activated, press a Direct Extension Selector (DXS) button.

You should hear a ringback tone.

6. Go on-hook.

3-9

Page 169
Image 169
ADTRAN 25 manual Test Attendant Console, Test Selector Console